Celsi Monitor (newborn temperature)
Where is the price?
Pricing is based on shipping location and the number of units ordered. To request a price, please use the Request a Quote button below. A sales representative will respond to you quickly.
The Celsi Monitor uses a (re-usable) probe attached to a silicone (re-usable) harness wrapped around an infant's chest to directly measure temperature through direct contact with the infant's skin. The temperature reading is sent to the monitor and displayed in a large format so that it is visible from across the room. The device is equipped with an alarm (which can be temporarily silenced).
Celsi Monitor
Product and ordering information
- Minimum quantity of three Celsi Monitors unit per order
- English instructions available
Mode of Operation: Direct, Continuous
Resolution: 0.1⁰C
Range: 25°C to 43.9°C
Accuracy: ±0.3°C
Measurement Refresh Rate: 10 seconds
Alarms: Audio and Visual
Display: LCD, 73mm (diagonal)
Voltage: AC 100-240V, 50/60Hz, 0.7A
Accessories: Celsi Belt & Probe Kit (Note that each Celsi monitor comes with 2 Celsi belts and one probe kit. However, the belts and probe kits are available separately as consumables for reorder.
Regulatory approval information
- Meets WHO guidelines for use in low-resource settings
- Meets NEST360 criteria for a newborn innovation
- FDA cleared
- The Celsi Monitor is made by Hadleigh Health Technologies which is an ISO 13485 registered company
FAQ
Why was the Celsi Monitor developed?
The NEST360 Consortium put together a Target Product Profile to specifically outline the criteria agreed upon by a wide range of stakeholders in the optimal design of a continuous temperature monitor.
The Innovation
The Celsi Monitor is a continuous temperature monitoring device made for challenging environments and busy wards. The small monitor (with very large font readout) clips readily on the side of any cot or bassinet with an adjustable silicone strap.
A silicone sensor connected to the monitor is then placed on the infant's body (chest), attaching to a little Celsi belt around the infant's chest, for continuous measurement of temperature. As opposed to a thermometer, which depends on a health worker stopping by the cot to assess the infant, the Celsi monitor is measuring temperature at all times and displaying changes in temperature on the screen. The temperature is updated every ten seconds. In addition, a large light across the top of the Celsi monitor will turn red (and flash) and immediately draw the attention of clinic or hospital staff if the infant is too warm or too cold. As a next level alert, an audio alarm will also sound to ensure that a baby that is not the right temperature is attended to immediately.
In addition to the large signal light across the entire top of the monitor, and the numeric readout of the temperature, the LCD screen also reads 'HI' if the infant is hyperthermic and 'LO' if the infant is hypothermic.
What is the capacity of the Celsi Monitor?
- The Celsi monitor can be left on an infant for 12 hours of continuous monitoring of temperature. The monitor should be checked every 12 hours and potentially moved so the probe touches another part of the infant's chest.
- The Celsi monitor measures infant temperature from 25°C to 43.9°C with an accuracy of ±0.3°C
Is the Celsi Monitor in use with patients?
Yes.
Is the product suitable for low-resource settings?
Yes, absolutely the product was built for use in Malawi and specifically for a newborn unit that does not have multi-parameter infant monitors but is in need of continuous monitoring of the newborn temperature.
Can the Celsi Monitor be used in all infants?
Celsi Monitor is appropriate for neonates greater than 28 weeks gestational age who weigh between 1-4 kg.
What are the contraindications for the Celsi Monitor?
The target population excludes neonates with extremely low birth
weight (ELBW) weighing <1000g.
Celsi Monitor is not appropriate for use on neonates who:
-Are less than 28 weeks gestational age
-Have severe birth asphyxia
-Have congenital abnormalities
-Have skin injuries or skin infections
Can the alarm be silenced?
Yes, the alarm can be temporarily silenced.
How do you charge the device?
The monitor is charged for three hours before use. A USB cord plugs into the device and an AC adaptor is plugged into the wall to charge the device.
How is the device cleaned between uses?
The Celsi monitor can be cleaned or disinfected according to instructions included in the instructions for use. The monitor can be wiped down with an alcohol wipe while the probe and harness can be soaked separately. The silicone items can be used an estimated 100 times.
Specifications
Mode of Operation: Direct, Continuous
Resolution: 0.1⁰C
Range: 25°C to 43.9°C
Accuracy: ±0.3°C
Measurement Refresh Rate: 10 seconds
Alarms: Audio and Visual
Display: LCD, 73mm (diagonal)
Voltage:AC 100-240V, 50/60Hz, 0.7A
Regulatory Compliance: FDA Cleared
Battery: Rechargeable Battery
Use Duration: 12 hours (when alarm is continuously active).
Accessories: Celsi Belt & Probe Kit